- CRI 98
- Aero-aluminum for heat, density, strength, work ability
- One-half size of the light storm LS 1
- U-frame with two truss-mounting directions and full rotation
- 2 power methods (SONY V export or Anton Bauer)
- DMX control
- 100m remote coverage
Aputure Light Storm LS 1/2w V-Mount
The Strongest Storm the Highest CRI
The color-rendering index (CRI) is a quantitative measure of the ability of a light source to reproduce the colors of various objects faithfully in comparison with an ideal or natural light source. The stunning breakthrough of Light Storm1/2w with CRI 98 can completely with perfect color of sunlight and ensure that its light is natural and lifelike.
Tough and Professional Aero-Aluminum
Light Storm1/2w use aero-aluminum to achieve the best balance performance of heat, density, strength, work ability, etc. So the function parameters can get a perfect show. Delicate design and elaborate production combine for a robust but exquisite housing that can fulfill low forward heat of the fixture.
Unique SMD Lamp Beads
The performance of an LED is one of the important factors to consider in LED lights. The Light Storm LS 1/2w is made of 264 SMD lamp beads which are using surface mount technology. Compared to DIP LED, SMD technology offers longer life, lower brightness decay, and wider light angle.
The light storm LS 1/2w is a one-half size of the light storm LS 1. Only 22mm (0.86in) thickness is so slim that can be used in a small environment like the wall corner, the car and some other small space. Compared with the traditional LED lights, such ultra-small size makes shooting more free, convenient and flexible.
From appearance to function, from material to craft, from small accessories to large complex production processes, the Light Storm 1/2w design reflects the combination of technology and humanity. The LS 1/2w undertakes more than 100 fabrication procedures such as extrusion, cutting, trim, sandblasting, oxidation, laser engraving, etc.
The professional connector is self-locking for a quick connection. Compared with conventional connectors, it can be operated quickly with one hand, making it more convenient and reliable.
The U-frame has two truss-mounting directions and can support full rotation of the lamp for easy lighting of different angles.
Selective Diffusing Paper
Aputure engineers tested 53 models of diffusing papers over more than 2000 hours to select the most suitable ones for our product. The diffusing paper has a smooth surface and is non-ageing, acid-free and recyclable with low opacity so effective diffusion angles are covered far more than the previous filter. The transmittance of the diffusing paper is about 85percent and a 180-degree effective diffusion angle.
Unique Light Control Separation Design
The LightStorm 1/2w's unique light control separation design paves the way for the light back panel dissipation. With such a low center of gravity design, it greatly reduces the lantern supporting system burden. For now, operations will not be limited to the light panel and are focused on the controller box. In addition, replacing the battery becomes more flexible than before.
Dual Power Solutions
Two methods can be used to power the LS 1/2w. A SONY V export or Anton Bauer battery can be used for location shooting. The adapter is for your indoor shooting.
The brightness of the LS 1/2w can be controlled by a DMX console, which is under the standard DMX512 protocol.
The brightness wheel on the controller box also can adjust the brightness. Two 90-degree antennas can cover all the surroundings within 360 degrees.
Using 2.4G FSK technologies, the Light Storm 1/2w can be adjusted in brightness wirelessly using a remote, even 100m away.
|Power Supply||DC 15V|
|Average Lifespan||≥100,000 hours|
|Cooling Mode||Natural Convection Heat Transfer|
- Controller box
- AC/DC adapter
- Power cable
- Connector cable
- ×10 Tracing papers
- ×5 Clamp
- Warranty card
- Product manual