- Pre-calibrated 32-bit Alexmos control board.
- Wireless Joystick.
- Max load: 3kg (6.6 lbs).
CAME-TV ARGO - 3 Axis Gimbal with Encoders - max. Payload 3kg
The CAME-ARGO features a 32 bit Alexmos Board and is completely tool-less adjustable. All of the motors are equipped with encoders which makes their performance much more smooth and accurate along with increasing the lifespan of the battery.
Included are a wireless remote control which allows you to control the gimbal from a distance and a foldable carbon fiber stand. Everything fits into the included compact hard case.
On the top section there are two handles that are easily hand screwed for installation or removal. On the handle there is a monitor mount and a wireless remote which allows you to remotely control the gimbal and switch between modes. The entire top handle bar can be easily separated from the gimbal which then can be mounted to other devices like a crane, slider or drone with the included adapter plate.
On the middle section there is a quick release battery that has a lifespan of about 15 hrs. (Less if you have electrical accessories attached) There are two ports with a hinged rubber seal on them. The top port is a USB connection that allows you to connect your computer to the Alexmos Board. The other is a RC connector.
We strongly recommend that when the gimbal is not in use or is in storage, to remove the 18650 LiPo batteries from the battery case. Failure to do so can result in over-discharge of the battery/batteries.
On the bottom there is a video transmitter along with a D-Tap out with which you can power an accessory like a wireless follow focus. There is a 15mm rod mount on which you can mount an accessory such as a wireless follow focus.
- Net weight: 2.9kg(6 lbs) Gimbal+Battery
- Total weight: 6.8kg (15 lbs) The Entire Argo Gimbal Including The Hardcase
- Gimbal Body
- 4 pin cable
- HDMI Converter
- Lipo battery
- Charger Cable
- Quick release plate
- Wireless Remote
- 5.8G transmitter
- 10cm rod
- Camera lens support
- Hard case